Healy App is the name of the application also known as the pink dot application. Which allows us to make use of our Healy device through our smartphone via a bluetooth connection.
This application is the main app that we must install on our mobile once we acquire a Healy. Although there are actually three applications. For in addition to the pink dot, you will also find two others in the app store.
The pink dot application or Healy App is very simple to use, and serves as an interface for the use of any of the Healy editions. Specifically for the application of programs that employ the emission of microcurrents.
The other two applications to install in addition to Healy App are HealAdvisor search, and HealAdvisor Analyse. The latter is better known as the blue app, or blue dot app. In this article, we will discuss Healy App in detail.
It should be noted that, in the case of the blue dot app, this is required to be installed when we have versions equal to or higher than the Holistic edition, and it is the one we use to apply frequency therapy remotely.
All three Healy applications are very fast and easy to install. They are also very easy to use. So very quickly we can learn to operate them quite easily and familiarly.
Healy App (Pink Dot App)
Installing Healy App or pink dot application is the first step after acquiring our Healy device and charging it according to the manufacturer’s recommendations. That is, between 4 and 8 hours, approximately.
As mentioned above, the pink dot Healy App is required for any of the Healy editions.
The programs that are applied through this application require the use of the bracelets or the adhesive electrodes. Some of the programs also allow the use of the Coil.
It is recommended to apply a maximum of 3 programs per day, especially at the beginning. Even if you are very sensitive to microcurrents, you can start by applying only one or two programs per day.
In any case, it is important to start using Healy with the programs of the Gold Cycle module. In order to create a harmonization of your bioenergetic field in a general way.
How to use Healy App
Once we have downloaded the app from the Google Play Store or the App Store, the first thing the app will do is request permissions to access the camera, which we must accept to continue.
It will also request permission to access the device’s location. In both permissions it is advisable to select the option “Only while the app is in use”.
Afterwards, usage and security warnings will appear, as well as the terms and conditions, and then a screen will appear asking you to turn on your Healy device.
You will then need to enter the 12-digit serial number located on the back of the device. You can also choose to scan the QR code if you prefer.
You will then need to click on connect and a screen will appear with a menu of options:
- Tan therapists
At this point, the application will notify you that an update is required. Which is necessary to allow for the list of available programs to appear. It is advisable to stay close to the Wi-Fi device during the update to make it faster.
Once the update is done, all the programs to which we have access according to the edition of Healy we have purchased will appear.
After this we can perform the first application. Which, as mentioned before, is recommended to be one of the Gold Cycle programs. It can be Pure, Being or Release, at the rate of one per day for three consecutive days.
Assuming that the first one we are going to run is the PURE program. Then when we select it, the first thing that appears is a screen that indicates where to place the electrodes or bracelets.
Then, the program is transmitted to the device and then we can start the application. At this point we can see a screen where we can see the name of the program, a circular progress bar and we can increase or decrease the intensity.
It is important to clarify that Healy applications cannot be used on the computer, they can only be installed and used on the cell phone. It should also be noted that the application works only one program at a time.
Points to note about using the Healy App
Application progress bar
It is important to note that when an application is running, the progress bar should be blank. This indicates that the intensity is correct and the current is flowing properly.
If the progress bar is black, this indicates that the circuit is open, i.e. the currents are not flowing properly or that there is a bad connection. It may also mean that the current is too low, or that there is a blockage in the person.
In these cases we should check that the bracelets or electrodes are well placed or increase the intensity of the currents. It is also recommended to wet the area of application to improve conductivity or that the person makes a ground connection.
Regarding the intensity it is recommended to set it around 30%, although this also depends on the degree of sensitivity of the person to microcurrents. In the case of children it is recommended to apply a low intensity, around 15 or 20%.
A gray progress band is also an indication that the frequencies are flowing correctly. This is generally the case with applications that do not have feedback, and which regularly have a duration of 20 minutes.
Recall that feedback refers to Healy’s ability to identify which frequencies the person actually needs. This process takes place within the first 3 to 10 minutes after the start of the program.
Due to feedback, although the pink dot application programs have a set duration, sometimes this can be shorter, because the device can detect if there are frequencies that are not required and then omit them.
Connectivity between Healy and the smartphone
Since Healy connects to the mobile app via Bluetooth, it is not advisable to move the device away from the mobile. While doing so will not cut off therapy, disconnection will prevent viewing the application progress of the programs.
It should be noted that, if for some reason we need to move away from the cell phone, we can also simply disconnect the Bluetooth. The program will continue to be applied for the corresponding time without any inconvenience.
Use of coil
It is important to mention that those programs in which there is a symbol consisting of three small circles or dots, are programs that can be applied both with the bracelets, the electrodes and the coil.
The programs, that do not have this symbol, should be applied only by using the bracelets or electrodes. That is, the coil cannot be used to run these particular programs.
It should be noted that the coil or coil is recommended especially for those programs aimed at restoring imbalances of an emotional nature.